Eaton Tripp Lite Series SMART1000RM2U 1kVA 800W Line-Interactive Sine Wave UPS

General Information

• Manufacturer: Eaton Corporation
• Brand Name: Tripp Lite series
• Manufacturer Part Number: SMART1000RM2U
• Product Line: SmartPro
• Product Name: SMART1000RM2U UPS System
• Product Type: Line-interactive UPS

Marketing Information:

• Protects Mission-Critical Rack-Mounted Equipment
  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload, low battery and fault conditions
  • 6 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 570-joule surge suppression rating
• Reliable Battery Backup
  • Supports half load up to 15 min. and full load up to 5.3 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs
• Switchable Outlets
  • 2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads
• Automatic Voltage Regulation (AVR)
  • Maintains 120V nominal output over input range of 83V-147V without using battery power
• EMI/RFI Line Noise Filtering
  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
• Interactive LCD Screen
  • Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
  • Rotates for easy viewing in rack-mount or tower configurations
• Network Management Cards
  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
• Communications Ports
  • USB and DB9 ports combine with PowerAlert software, available via free download, to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
  • EPO port supports emergency shutdown in large facilities
• Versatile Installation Options
  • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
  • Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory

Technical Information

• Plug/Connector Type: NEMA 5-15P
• Receptacle Type: NEMA 5-15R
• Receptacle Detail: 6 x NEMA 5-15R
• Emergency Power OFF: Yes
• Cord Length: 10 ft

Power Description

• Load Capacity (VA): 1000 VA
• Load Capacity (Watt): 800 W
• Input Voltage: 120 V AC
• Output Voltage: 120 V AC

• Waveform Type: Sine Wave

Management

• Network Management: SNMP Manageable

Alarm:

• On Battery
• Overload
• Low Battery

Interfaces/Ports

• USB: Yes
• Total Number of Expansion Slots: 1

Battery Information

• Battery Chemistry: Lead Acid
• Backup/Run Time (Full Load): 5.30 Minute
• Backup/Run Time (Half Load): 15 Minute
• Typical Battery Recharge Time: 4 Hour

Hot Swappable: Yes

Environmental Conditions

• Maximum Operating Temperature: 104°F (40°C)

Physical Characteristics

• Height: 3.5"
• Width: 17.5"
• Depth: 12.5"
• Rack Height: 2U

Miscellaneous

• Package Contents:
  • SMART1000RM2U UPS System
  • PowerAlert Software CD
  • Serial & EPO Cabling
  • 4 x Post Rackmount Installation Kit
  • Instruction Manual

Certifications & Standards:

UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications

Software Included: PowerAlert Software

Country of Origin: Taiwan

Warranty

• Limited Warranty: 3 Year from Eaton Corporation

Shipping Notes:

All our products are normally shipped within 1-2 business days from any of our warehouse locations below:

• Monrovia, CA 91016 (Most usual)
• Fresno, CA 93725
• Newman, GA 30265
• Bolingbrook, IL
• Middletown, PA 17057
• Harrisburg PA 17112

International orders may take an additional 2 to 3 days.

California Prop 65 Warning. This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 

...JA-2510