Fluke Networks MS-POE-KIT 5018513 MicroScanner PoE Cable Verifier Tester Kit

Product overview: Fluke Networks MicroScanner™ PoE Cable Verifier Kit

The MicroScanner PoE Cable Verifier validates and troubleshoots your Industrial Ethernet copper cabling, helping to reduce down time in time-sensitive industrial networks. It performs continuity tests on all wires in a few seconds and displays the results graphically, so you can see opens, shorts, and crossed wires.

The MicroScanner PoE helps make installation, maintenance, and troubleshooting on IT, security, PoE lighting, Ethernet-based HVAC devices, and IP-based building automation systems easier. Its oversized, backlit LCD screen displays clear results in any light or complete dark with intuitive icons and support of Class 0 to 8 PoE.

Environmental specifications

• Operating temperature: 32 °F to 113 °F (0 °C to 45 °C)
• Storage temperature: -4 °F to +140 °F (-20 °C to +60 °C)
• Operating relative humidity (% RH without condensation): 90 % (50 °F to 95 °F 10 °C to 35 °C)
• 75 % (95 °F to 113 °F 35 °C to 45 °C)
• Shock and Vibration: Random, 2 g, 5 Hz-500 Hz (Class 2)
• 1 m drop test with and without wiremap adapter attached
• Safety: IEC 61010-1 3rd Edition
• Altitude: 4,000 m; Storage: 12,000 m
• EMC: IEC 61326-1

General specifications

• Test connectors: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. 
• Power: Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
• Battery life: 20 hours of typical use
• Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
• Dimensions and weight (with batteries installed and wiremap adapter attached): 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
• MicroScanner™ PoE: 10.6 oz (300 g)
• Display: Monochrome LCD with backlight

Test modes

• Cable test: Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner™ PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
• Tone: Generates Intellitone™ and normal analog toning signals
• PoE: MicroScanner™ PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices

Performance specifications

• Cable types tested: Twisted pair: UTP, FTP, SSTP
• Length test: Range: 460 m (1500 ft)
• Resolution: 0.3 m (1 ft)
• Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
• Calibration: User-settable NVP for twisted pair and coax (MicroScanner™2). Can determine actual NVP with known length of cable.
• Wiremap test: Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
• Ethernet port detection: MicroScanner™ PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
• Tone generator: Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

What's in the box:

• MicroScanner PoE unit
• Remote IDs
• IntelliTone Pro 200 probe
• Adapters
• Commonly used accessories
• Deluxe duffel bag

..

Shipping Notes:

All our Fluke products are normally shipped within 1-2 business days from any of our warehouse locations below:

• Monrovia, CA 91016 (Most usual)
• Fort Worth, TX 76155
• Carol Stream, IL 60188
• Moore, SC 29369
• Hazelton, PA 18202

…MJ5