Fluke Networks MS2-100 2772449 MicroScanner RJ11 RJ45 COAX Cable Verifier

Product overview: Fluke Networks MicroScanner™ Cable Verifier

The MicroScanner2 Cable Verifier helps find common errors quickly, displaying results from what were four different test modes all at once on its oversized, backlit LCD display: graphical wire map, pair lengths, distance to fault, cable ID, and far-end device. Its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing, with no need for awkward adapters. The end result is reduced test time and technician error — which makes high-quality installations more efficient and troubleshooting easier.

Key features

• Wire map, length, cable ID, distance to fault on one screen
• Tests common media types, such as RJ11, RJ45, and coax, without adapters
• VDV Service Detection verifies 10/100/1000 Ethernet, POTS, and PoE

Environmental specifications

• Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
• Storage temperature: -4 °F to +140 °F (-20 °C to +60 °C)
• Operating relative humidity (% RH without condensation): 
  • 90 % (50 °F to 95 °F 10 °C to 35 °C)
  • 75 % (95 °F to 113 °F 35 °C to 45 °C)
• Shock and Vibration: 
  • Random, 2 g, 5 Hz-500 Hz (Class 2)
  • 1 m drop test with and without wiremap adapter attached
• Safety: IEC 61010-1 3rd Edition
• Altitude: 4,000 m; Storage: 12,000 m
• EMC: IEC 61326-1

General specifications

• Test connectors: Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable.
• Power: Battery type: 
  • 2 AA (NEDA 15A, IEC LR6) alkaline batteries
  • Battery life: 20 hours of typical use
  • Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
• Dimensions and weight (with batteries installed and wiremap adapter attached): 
  • 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
  • MicroScanner2: 10.6 oz (300 g)
• Display: Monochrome LCD with backlight

Test modes

• Cable test: Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
• Tone: Generates Intellitone™ and normal analog toning signals
• PoE: MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices

Performance specifications

• Cable types tested: Twisted pair: UTP, FTP, SSTP
• Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
• Length test: Range: 
  • 460 m (1500 ft)
  • Resolution: 0.3 m (1 ft)
  • Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
  • Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable.
• Wiremap test: Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
• Ethernet port detection: MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
• Tone generator: Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

What is Included

• MicroScanner2 Cable Verifier with main wiremap adapter
• Multi-language getting started guide
• Batteries
• Fluke Networks carry pouch

..

Shipping Notes:

All our Fluke products are normally shipped within 1-2 business days from any of our warehouse locations below:

• Monrovia, CA 91016 (Most usual)
• Fort Worth, TX 76155
• Carol Stream, IL 60188
• Moore, SC 29369
• Hazelton, PA 18202

…MJ5