Perle 05050184 S-1000-SFP Gigabit Ethernet Managed Media Converter SFP Exp Slot

S-1000-SFP Gigabit Ethernet Media Converter. 1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-X - SFP slot (empty).

An advanced Fiber to Ethernet Media Converter solution to transparently connect copper to fiber. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs.

Power

• Input Supply Voltage: 6 - 30 vDC, unregulated (12 vDC Nominal)
• Current: 250 mA
• Power Consumption: 3.0 watts
• Power Connector: 5.5mm x 9.5mm x 2.1mm barrel socket

Power Adapter

• Universal AC/DC Adapter: 100-240v AC, regulated DC adapter included

Indicators

• Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
• Fiber link on / Receive activity (LKF): This green LED is operational only when power is applied. The LED is on when the 1000Base-X link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-X interface has been taken down as a result of a fault on the 1000Base-T interface.
• Copper link on / Receive activity (LKC): This green LED is operational only when power is applied. The LED i on when the 1000Base-T link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-T interface has been taken down as a result of a fault on the 1000Base-T interface.

Switches - accessible through a side opening in the chassis

• Auto-Negotiation
  • Enabled (Default - Up) - In this mode the 1000Base-X and the 1000Base-T will negotiate to the HCD of the two link partners. The 1000Base-X will link up after the negotiation is completed and the 1000Base-T has linked up.
  • Disabled - The 1000Base-X will not use auto negotiation. The 1000Base-T will negotiate to the HCD of the Switch settings and the link partner.
• Link Mode
  • Link Mode provides a transparency to the state of the copper link allowing for simplified trouble shooting from the devices connected to the media converter.
  • Normal (Default — Up)
    • With Fiber Auto Negotiation enabled when the 1000Base-T link goes down the 1000Base-X link is brought down. The 1000Base-X link will advertise Remote Fault (Link Fault).
    • With Fiber Auto Negotiation disabled the state of the 1000Base-T link has no effect on the 1000Base-X link.
  • Smart Link Pass Through (Down)
    • With Fiber Auto Negotiation enabled the behavior is as follows. When the 1000Base-T link goes down the 1000Base-X link is brought down. The 1000Base-X link will advertise Remote Fault (Link Fault). When Remote Fault (Link Fault) is received on the 1000Base-X interface the 1000Base-T transmitter will be turned off. When the 1000Base-T receiver is off the 1000Base-X transmitter will be turned off. When the 1000Base-X receiver goes off the 1000Base-T transmitter will be turned off.
    • With Fiber Auto-Negotiation disabled the behavior is as follows. When the 1000Base-T receiver is off the 1000Base-X transmitter will be turned off. When the 1000Base-X receiver goes off the 1000Base-T transmitter will be turned off.
  • Pause
    • When Fiber Auto Negotiation is disabled Pause should only be enabled when all devices connected to the media converter support pause.
    • Enabled (Default) - The Media converter will advertise Pause capable, Asymmetric pause not needed during Auto-Negotiation.
    • Disabled - The Media converter will advertise that it does not have Pause capability during Auto-Negotiation.
  • Fiber Fault Alert
    • The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled
    • Enabled (Default - Up) - When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature.
    • Disabled (Down)
  • Duplex
    • Full (Default-Up) - The media converter will advertise Full Duplex Capable, Half Duplex Capable.
    • AUTO (Down) - The Media converter will advertise Full Duplex Not Capable, Half Duplex Capable.
  • Remote Loopback
    • The media converter can perform a loopback on the 1000Base-X fiber interface.
    • Disabled (Default - Up)
    • Enabled - The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface.

Connectors

• 1000Base-T: RJ45 connector, 4 pair CAT5 UTP cable or better
• Magnetic Isolation: 1.5kv
• Small Form Factor Pluggable(SFP) slot
  • Empty slot for 100Base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs.
  • Hot insertion and removable (hot swappable).

Product Weight and Dimensions

• Weight: 0.3 kg, 0.66 lbs
• Dimensions: 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches

Shipping Notes:

All our products are normally shipped within 1-2 business days from any of our warehouse locations below:

• Monrovia, CA 91016 (Most usual)
• Fort Worth, TX 76155
• Carol Stream, IL 60188
• Moore, SC 29369
• Hazelton, PA 18202

California Prop 65 Warning. This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Visit www.P65Warnings.ca.gov

…MJ5