Perle 05060574 S-4GPT-DSFP Media Converter Protocol Transparent w Dual SFP

S-4GPT-DSFP Protocol Transparent Media Converter with dual SFP slots (empty). Supports two SFPs with identical speeds up to 4. 25 Gbps. AC adapter included.

An advanced Fiber to Ethernet Media Converter solution to transparently connect copper to fiber. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs.

* SFP transceivers are NOT included

HARDWARE SPECIFICATIONS

Power

• Input Supply Voltage: 6 - 30 vDC, unregulated (12 vDC Nominal)
• Current: 325mA @ 12VDC
• Power Consumption: 4 watts
• Power Connector: 5.5mm x 9.5mm x 2.1mm barrel socket

Power Adapter

• Universal AC/DC Adapter: 100-240v AC, regulated DC adapter included

Indicators

• Power
  • This green LED is turned on when power is applied to the media converter. This LED is off when there is no power supplied.
  • A Blinking LED will indicate that a hardware error has been detected.
• LK1: LED is ON when a signal is detected on LK1. LED is OFF when there is no signal.
• LK2: LED is ON when a signal is detected on LK2. LED is OFF when there is no signal.

Switches - accessible through a side opening in the chassis

• Link Mode
  • Smart Link Pass-Through when enabled (Default) ensures that the link state on a fiber connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter. This feature applies when both SFP slots are occupied.
  • If set in Standard Mode, the link is kept active. The unit will transmit a 25Mhz keep-alive signal to artificially keep the link up.
• Fiber Fault Alert
  • If the media converter module detects a loss of fiber, it will immediately notify the fiber link partner that an error condition exists.
  • Disabled (Default). The Media Converter will not monitor for fiber fault.
• Multi-speed SFP
  • When enabled, identifies that the SFPs inserted are MSA complaint SFPs that have a multi-rate capability.
  • When disable (Default), no action is performed in this context.
• Rate Select
  • This enables rate selection when using dual-rate capable SFPs. If the “Multi-Speed SFP” select switch is in the “Disabled” position, this switch is ignored.
    • High Speed - UP (default)
    • Low Speed – DOWN

2 x SFP Slots

• SFPs
  • SFP line rates up to 4.25Gbps are supported. The SFPs occupying each slot in the media converter must be operating at the same speed.
  • SFP power level 1 and 2 are supported.

Mounting

• Din Rail Kit: Optional (Sold Separately)
• Wall/Rack Mount Kit: Optional(Sold Separately)

Product Weight and Dimensions

• Weight: 0.3 Kg, 0.7 lbs
• Dimensions (W x H x D): 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches

Shipping Notes:

All our products are normally shipped within 1-2 business days from any of our warehouse locations below:

• Monrovia, CA 91016 (Most usual)
• Fort Worth, TX 76155
• Carol Stream, IL 60188
• Moore, SC 29369
• Hazelton, PA 18202

California Prop 65 Warning. This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Visit www.P65Warnings.ca.gov

…MJ5