Vendor: Openvox

OpenVox D130P Single Span T1 E1 J1 PRI PCI Card Low Profile Adv

SKU: D130P
Regular price $351.12 Sale price $351.12 Regular price $399.00
Save $47.88 $47.88 ($47.88)
Shipping calculated at checkout.

Orders received by 10 am are shipped on the same business day. Mondays through Saturday.

In stock: 4
Description

OpenVox D130P is now the leading single port T1/E1/J1 PCI card in the open source industry. It supports up to 32 channels in E1 mode or 24 channels in T1/J1 modes.

    📃

    MORE PRODUCT INFORMATION

    The D130P is an upgrade product of the D115P. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. D130P is supposed to be the most advanced single port T1/E1/J1 asterisk® card with superior quality in the open source community. The leading innovation ensures users to adjust the interrupts frequency to reduce the CPU load up to 70% and adjust the interrupt number to avoid interrupt number sharing or conflict.

    D130P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

    D130P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

    • Industry 1st adjustable interrupt routing design
    • Interrupts frequency adjustment
    • Compatible with All Commercially Available Motherboards
    • Single T1/E1/J1 ports with PCI interface for high performance voice and data applications
    • Single T1/E1/J1 ports with PCI interface for high performance voice and data applications
    • Half-length PRI card
    • RJ48 connector
    • Low profile option
    • 32 bit 33MHz PCI and fully PCI 2.3 compliant
    • 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
    • Autosense compatibility with 5 V and 3.3 V PCI busses
    • FPGA design, upgradeable firmware onsite
    • Power: 2.1W Minimum, 3.1W Maximum at 3.3 V or 5 V.
    • Operation temperature: 0°C to 50°C
    • Storage temperature: -65°C to 125°C
    • Dimension: 2U Form factor: 12*6.4*1.8cm
    • Weight: 90g